Voice Assistant Overview
Installing Voice Assistant
Voice Assistant Adminstrator Guide 10/08 15
Pgm Misc
Centrex Transfers
Feature Code: The Telephone System Centrex Transfer Feature Code is programmable and
whatever code has been chosen should be entered here.
Pause Before Dial Number: A variable combination of the Telephone System and Central Office
System will delay the return of dial tone once the Centrex Transfer has been initiated. This entry
allows you to program how long the system will pause before it tries to dial the transfer phone
number. Every situation will have a slightly different requirement here and this number should be
adjusted until it is neither too long or too short a pause. If this value is set to zero, the program will
wait for audible dial tone from the central office before dialing the phone number (instead of a
fixed-length pause).
Fail-Safe Transfer
Enter the extension number calls should go to in case of voice port failure.
To Next Page
Loading...
Need help?
General