Toshiba Super MMY-MAP0801HT8 - Cancel of Timer Operation; TIMER Operation

39
3-9. TIMER Operation
A type of timer operation can be selected from the following three types.
OFF timer : The operation stops when the time of timer has reached the set time.
Repeat OFF timer : Every time, the operation stops after the set time has passed.
ON timer : The operation starts when the time of timer has reached the set time.
Timer operation
1 Push TIMER SET button.
• The timer display (type) changes for every
push of the button.
• SET DATA and display flashes.
2 Push to select “SET TIME”.
For every push of button, the set time increases in the unit of 0.5 hr (30 minutes).
The maximum set time is 72.0 hr.
For every push of button, the set time decreases in the unit of 0.5 hr (30 minutes).
The minimum set time is 0.5 hr.
3 Push SET button.
• SET DATA display disappears and display goes on.
(When ON timer is activated, time is displayed, and after time of the timer has been up, displays other
than ON disappear.)
Cancel of timer operation
4 Push CL button.
• TIMER display disappears.
NOTICE
• When the operation stops after the timer reached the preset time, the Repeat OFF timer resumes the
operation by pushing button and stops the operation after the time of the timer has reached the
set time.
UNIT
4
1
SET
CL
3
2
OFF
(OFF timer) (Repeat OFF timer)
No display
(ON timer)
OFF ON