3. How to set the environments for connecting OPC
27
<7> Select the “Security” tab in the “TOSHIBA
TC-net OPC Data Access Server Properties”
window and select “Customize” in “Access
Permissions” and click <Edit…>.
<8> Click <Add…> on “Access Permission“
window.
Add “Everyone” to [Group or user names] like
<5> and, Select “Everyone” on “Access
Permission” window to permit “Remote Access”
Set it so that "Local Access" and "Remote
Access" become a check state.
Click <OK>.
<9> Select the “Identify” tab in the “TOSHIBA TC-net
OPC Data Access Server Properties” window
and select “The interactive user” and click
<OK>.
Close “Component Services”
Figure 3.4 OPC Server Setting (Windows8.1/ Windows7/Windows Vista/
Windows Server 2008/Windows Server 2008 R2/Windows Server 2012 R2)
To Next Page
Loading...
