Names of each part on the main unit
Back
Front
(10)
(11)
(9)
(8)
(8)
(13)
(6)
(1)(4)
(3)
(2)
(5)
(7)
(12)
(14) (15)
Name : Function
(1) Lens : Projects expanded image.
(2) Infrared remote sensor : Senses commands from the remote control.
(3) Foot adjuster release button : Press to set up or stow the foot adjuster.
(4) Air exhaust : Expels air that has grown hot inside the projector.
(5) Control panel : Operates the projector.
(6) Zooming lever : Adjusts screen size.
(7) Focusing Ring : Adjusts screen focus.
(8) Air intake : Draws in air from outside the projector.
(9) AC IN socket : Connect the supplied power cord here.
(
10
) Rear panel : Connects external devices.
(
11
) Antitheft lock hole : Attach a safety cable or any other antitheft device.
(
12
) Speaker : Outputs audio sound.
(
13
) Tilt adjuster : Adjusts the projector’s horizontal tilt.
(
14
) Lamp cover : Remove to replace lamp.
(
15
) Foot adjuster : Adjusts the vertical projection angle.
To Next Page
Loading...
