Using the menus (Continued)
■ The default setting menu
This menu shows placement status and other settings.
Item
Description
Projection
mode
Sets projection mode in accordance with Placement Style.
(Standard)
(Rear)
(Ceiling)
(Rear ceiling)
Auto input
search
Set whether the input with signals is only selected or not.
On Off
Language Select one of the languages below to use for displaying the menu
and messages
[ : Enter setting mode] [ :Selection] [Apply: ]
English/Français/Deutsch/Italiano/Español/Português/
/Svenska/Türkçe/Polski/ / / /
Fan mode
Sets the cooling fan speed.
Standard High
Lamp power
Sets the lamp power.
Low Standard
Password
Password function
On Off
When [Password] is [On], the Password Setting screen is displayed.
Power on Sets whether to turn on the power when the ON/STANDBY button is
pressed (Manual), or when the power cord is plugged in (Auto).
Manual Auto
Detailed description
[Fan mode]
Setting [Fan mode] to [High] increases the cooling fan speed. Set this option to use
the projector, for example, at high altitude (over 1,500 meters above sea level).
[Lamp power]
When [Lamp power] is set to [Low], the screen becomes a little darker, but the
cooling fan noise gets quieter.
To Next Page
Loading...
Need help?
General
