Tests and Diagnostics
3-48 [CONFIDENTIAL]) TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)
Subtest 02 Pressed Key Display (Ten key): Not used
When you execute this subtest, the keyboard layout is drawn on the display as
shown below. When any key is pressed, the corresponding key on the screen
changes to the key character that was pressed. Holding a key down enables
the auto-repeat function that causes the key’s display character to blink.
Press Del + Enter (Ten key) to end the test.
[ Ten key test]
IF TEST OK, Press [Dell][Enter]key
To Next Page
Loading...
