4 Replacement Procedures 4.21 Speaker
4-80 [CONFIDENTIAL] TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)
4.21 Speaker
Removing the Speaker
To remove the speaker, follow the steps below and refer to Figure 4-45.
1. Peel off the acetate tapes.
2. Remove the speakers (left and right) from the speaker slots and the speaker harness
from the guides.
Figure 4-45 Removing the speaker
Speaker harness
Speaker
(white&black harness)
Speaker
(red&black harness)
Guide
Acetate tape
To Next Page
Loading...
