Toshiba TECRA M11 Series - 4.15 Bluetooth Module Replacement

4.15 Bluetooth module 4 Replacement Procedures
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL] 4-55
4.15 Bluetooth module
Removing the Bluetooth module
To remove the Bluetooth module, follow the steps below and refer to Figure 4-31.
1. Disconnect the Bluetooth harness from the connector CN4440 on the system board.
2. Open the latches and remove the Bluetooth module from the guides.
3. Disconnect the Bluetooth harness from the connector on the Bluetooth module.
Figure 4-31 Removing the Bluetooth module
CN4440
Bluetooth module
Bluetooth harness
Guide
Latch