4 Replacement Procedures 4.24 Camera module/Wireless LAN antenna/3G antenna
4-104
「
CONFIDENTIAL] TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)
4.24 Camera module/Wireless LAN antenna/3G antenna
Removing the Camera module/Wireless LAN antenna/3G antenna
To remove the camera module/wireless LAN antenna/3G antenna, follow the steps below
and refer to Figure 4-58 and 4-59.
1. Disconnect the camera harness from the connector on the camera module.
2. Remove the camera module from the slot of the LCD cover.
Figure 4-58 Removing the camera module
NOTE: Do not reuse the removed camera module. Be sure to use new camera module.
Camera module
Camera harness
To Next Page
Loading...
