4 Replacement Procedures 4.7 HDD
4-24 [CONFIDENTIAL] TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)
4.7 HDD
Removing the HDD
To remove the HDD, follow the steps below and refer to Figure 4-11 to 4-13.
CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause the
data loss or damage to the device.
1. Remove the following screw securing the HDD cover.
• M2.5×5B FLAT HEAD screw ×1
2. Insert your finger into the slot and lift the HDD cover to remove.
Figure 4-11 Removing the HDD cover
HDD cover
M2.5×5B FLAT HEAD
Slot
To Next Page
Loading...
