Toshiba TECRA M11 Series - Page 26

1 Hardware Overview
1-16 TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL]
 CardBus / PC card controller (Yenta2 Ver.2.2)
 SD card controller (SDHC Ver.1.2)
 A SD IO card controller (Ver.1.0)
 SmartMedia Controller (SMHC Ver.01/SMIL1.0) (it is not used in Spa)
 SIO (UART) controller (MS Debug Port Specification ver.1.0)
 Docking interface (Q-SW control, reset control)
 External device interface
(1)Calpella Ibex Peak-M HM55 (Non-AMT)
(2)Calpella Ibex Peak-M QM57 (AMT)
- 1071-ball 25x27mm FCBGA Package
 VGA Controller
The PC comes in with one of the following two types:
 The internal graphics controller in Intel Processor (Core i*) is used..
 nVIDIA NVS 2100M is used.
 LAN Controller
This controller has the following functions:
 Support only a Gigabit Ethernet.
 RJ45x1 port (with LED), docking connector (branch) 1 port.
 WOL support (from S3, S4, and S5)
 LAN controller
Made in Intel Hanksville (WG82577 LC/LM (AMT)): PCI-Ex Connection
 AMT6.0 support (BTO correspondence)