4.12 Cover assembly and Base assembly 4 Replacement Procedures
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL] 4-47
4. Turn over the computer and secure the cover assembly and base assembly with the
following screws.
• M2.5×8B FLAT HEAD screw ×11 (“8” in the Figure 4-23)
• M2.5×12B FLAT HEAD screw ×1 (“12” in the Figure 4-23)
• M2.5×5B FLAT HEAD screw ×1 (“5” in the Figure 4-23)
5. Connect the 3G antenna cables and 3G power harness to the connectors on the
jack/3G/Express board.
To Next Page
Loading...
