Toshiba TECRA M11 Series - Page 341

4 Replacement Procedures 4.13 MDC/USB board
4-50 [CONFIDENTIAL] TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)
6. Remove the following screws and disconnect the MDC module from the connector
CN3010 on the MDC/USB board.
• M2.0×3C BIND screw ×2
Figure 4-28 Removing the MDC/USB board (2) (MDC model)
MDC module
CN3010
M2.0x3C BIND