4.17 Jack/3G/Express board/Microphone/3G card 4 Replacement Procedures
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL] 4-61
8. Turn over the jack/3G/Express board.
9. Remove the following screws securing the 3G card.
• M2.0×3C BIND screw ×2
10. Disconnect the 3G card from the connector on the jack/3G/Express board.
Figure 4-35 Removing the 3G card
M2.0x3C BIND
3G card
To Next Page
Loading...
