User’s Manual 7-1
TECRA M2
Chapter 7
HW Setup
This chapter explains how to use TOSHIBA HW Setup program to
configure your computer. TOSHIBA HW Setup lets you configure settings
for Display, CPU, Boot Priority, Keyboard, USB, LAN, General, Device
Config and Parallel/Printer.
Accessing HW Setup
To run HW Setup, click start, click Control Panel, click Printers and Other
Hardware and select TOSHIBA HW Setup.
HW Setup window
The HW Setup window contains the following tabs: General, Device Config,
Parallel/Printer, Display, CPU, Boot Priority, Keyboard, USB and LAN.
There are also three buttons: OK, Cancel and Apply.
Some models are not equipped with Parallel/Printer tab and/or CPU tab.
OK Accepts your changes and closes the HW Setup
window.
Cancel Closes the window without accepting your
changes.
Apply Accepts all your changes without closing the HW
Setup window.
To Next Page
Loading...
