2-10 User’s Manual
The Grand Tour
System indicators
LEDs beneath icons, light when various computer operations are in
progress.
Figure 2-7 System indicators
Power button Press the power button to turn the computer’s
power on and off.
LCD Sensor switch This switch senses when the LCD panel is closed
or opened and activates the Panel Power Off/On
feature. When you close the panel the computer
enters Hibernation mode and shuts down. When
you open the panel the computer starts in
Hibernation mode. Use the TOSHIBA Power
Saver Utility to enable or disable this feature.
The default is “enabled”. Refer to the TOSHIBA
Power Saver Utility and Panel Power Off/On
items in Chapter 1, Introduction, for details on
settings.
Do not put a magnetic object close to the switch. The computer will
automatically enter Hibernation mode and shut down even if the Panel
Power Off features is disabled.
SD card
DC IN 15V Power Battery Disk Slim Select
Bay
Wirelles
communication
SD card The SD card indicator glows blue when the
computer is accessing the SD card slot.
DC IN 15V The DC IN 15V indicator glows in green when
DC power is supplied from the AC power
adaptor. If the adaptor’s output voltage is
abnormal or if the power supply malfunctions,
this indicator flashes orange.
To Next Page
Loading...
