Toshiba TECRA M2 - Inserting a Module

User’s Manual 4-5
Operating Basics
6. Grasp the DVD-ROM drive and slide it out.
Figure 4-4 Removing the Slim Select Bay HDD adaptor
Inserting a module
Insert the Slim Select Bay HDD adaptor as described below.
1. Insert the Slim Select Bay HDD adaptor in the computer as shown
below and press until the ejector clicks.
2. If you want to lock the Slim Select Bay module, set the Slim Select Bay
lock screw in the hole for the lock position.(➁) The lock screw is
inserted in the unlock position(➀) at the time of purchasing.
Figure 4-5 Inserting the Slim Select Bay HDD adaptor
The DVD-ROM drive and other Slim Select Bay modules can become hot
with use. Be careful when removing the module.
Lock Screw
Silm Select Bay
Module
Silm Select
Bay Latch
Silm Select Bay
Module
Lock Screw