User’s Manual 8-7
Optional Devices
5. Slide the display latch on the front of the computer to the right and open
the display panel.
6. Insert a thin object under the rim of the keyboard brace and lift out the
brace.
7. Remove two screws securing the keyboard.
Figure 8-6 Removing the keybord brace and removing two screws
8. Lift up the back of the keyboard, rotate it toward you and lay in face
down on the palm rest.
Figure 8-7 Rotate the keyboard
Remove a keyboard brace after surely performing step 4. If step 4 is not
performed, there is a possibility of damaging a keyboard brace.
Use a point size 0 Phillips screwdriver.
■ When you move the keyboard forward, do not touch the keys. Doing so
could cause misalignment. Hold the keyboard by the sides and lay it
gently on the palm rest.
■ The keyboard is connected to the computer by a ribbon cable. Be
careful not to apply tension to this cable when you lift up the keyboard.
Do not try to disconnect this cable.
To Next Page
Loading...
