Toshiba Tosvert VF-S15 Manual

E6582051
- 15 -
3.1.2. Mounting of option for VF-AS3
3.1.2.1. Mounting of option
1. Insert option into option slot A of VF-AS3.
*Note:Insert the option straightly and slowly along the guide inside option slot A.
Follow this instruction, the connecter can become damaged.
3.1.2.2. Removing of option
1. Remove an option in the direction of arrow ② while pushing the release tab in the direction of arrow ①.
Option slot A
Release tab
①
②

Toshiba Tosvert VF-S15 Specifications

General

Category	Inverter
Control Method	V/f control, Sensorless vector control
Cooling Method	Forced air cooling
Model	Tosvert VF-S15
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication Options	Modbus RTU
Overload Capacity	150% for 1 minute
Braking Unit	Built-in braking transistor
Output Voltage	3-Phase, same as input voltage
Operating Temperature	-10 to +50°C (14 to 122°F)
Storage Temperature	-20 to 65°C (-4 to 149°F)
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m above sea level
Input Voltage	3-Phase 200 to 240 VAC, 3-Phase 380 to 480 VAC
Weight	Varies depending on model (e.g., 0.8 kg to 16 kg)