Toshiba Tosvert VF-S15 Manual

E6582051
- 61 -
8.5. "06 (0x06) Write Single Register" function
This Modbus request is used to write the value to the inverter parameter.
Request format:
Byte
Meaning
0
Function Code = 06h
1
Communication No. of Parameter Hi
2
Communication No. of Parameter Lo
3
Write Data Hi
4
Write Data Lo
Response format:
Byte
Meaning
0
Function Code = 06h
1
Communication No. of Parameter Hi
2
Communication No. of Parameter Lo
3
Write Data Hi
4
Write Data Lo
Exception response format:
Byte
Meaning
0
Function Code = 86h
1
Exception Code
01: Illegal Function
02: Illegal Data Address
03: Illegal Data Value
04: Slave Device Failure
Notes
When you use this Modbus request, the value is written to the EEPROM.

Toshiba Tosvert VF-S15 Specifications

General

Category	Inverter
Control Method	V/f control, Sensorless vector control
Cooling Method	Forced air cooling
Model	Tosvert VF-S15
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication Options	Modbus RTU
Overload Capacity	150% for 1 minute
Braking Unit	Built-in braking transistor
Output Voltage	3-Phase, same as input voltage
Operating Temperature	-10 to +50°C (14 to 122°F)
Storage Temperature	-20 to 65°C (-4 to 149°F)
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m above sea level
Input Voltage	3-Phase 200 to 240 VAC, 3-Phase 380 to 480 VAC
Weight	Varies depending on model (e.g., 0.8 kg to 16 kg)