Toshiba Tosvert VF-S15 Manual

E6582051
- 69 -
9.4.
Drive parameters (Main menu: Monitoring)
The parameters of the inverter can be confirmed / set on this page.
The left column is used to select a modify group (or list) of parameters. The right column displays the
parameters, its Modbus address and its current value.

Set the parameters
When you modify the inverter parameter from the Web server, please press the set button, and input the
“Web write password”. (The default password is "USER.")
Start the monitor
Set the parameter

Toshiba Tosvert VF-S15 Specifications

General

Category	Inverter
Control Method	V/f control, Sensorless vector control
Cooling Method	Forced air cooling
Model	Tosvert VF-S15
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication Options	Modbus RTU
Overload Capacity	150% for 1 minute
Braking Unit	Built-in braking transistor
Output Voltage	3-Phase, same as input voltage
Operating Temperature	-10 to +50°C (14 to 122°F)
Storage Temperature	-20 to 65°C (-4 to 149°F)
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m above sea level
Input Voltage	3-Phase 200 to 240 VAC, 3-Phase 380 to 480 VAC
Weight	Varies depending on model (e.g., 0.8 kg to 16 kg)