Toshiba Tosvert VF-S15 Manual

E6582051
- 65 -
9. Web server
The option has Web server function. Writing and reading the inverter parameter and monitoring the drive’s
status can be done by using this function through network.
This chapter describes the Web server function.
9.1.
Access to the Web server
In order to access the Web server, please use the version 8.0 and 11.0 of Internet Explorer.
In addition, because the Web server uses a Java applet, please use the PC that supports the Java runtime
environment.
Java7 and 8 can be used with Web server.
However, operation of Web server may not be guaranteed depending on the revision of the Internet
Explorer or Java.
Startup the web browser and input IP address of the inverter as the homepage address.
Enter the user name and password (“Web read password”), default password is “USER”.
IP address of the inverter

Toshiba Tosvert VF-S15 Specifications

General

Category	Inverter
Control Method	V/f control, Sensorless vector control
Cooling Method	Forced air cooling
Model	Tosvert VF-S15
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication Options	Modbus RTU
Overload Capacity	150% for 1 minute
Braking Unit	Built-in braking transistor
Output Voltage	3-Phase, same as input voltage
Operating Temperature	-10 to +50°C (14 to 122°F)
Storage Temperature	-20 to 65°C (-4 to 149°F)
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m above sea level
Input Voltage	3-Phase 200 to 240 VAC, 3-Phase 380 to 480 VAC
Weight	Varies depending on model (e.g., 0.8 kg to 16 kg)