E6582051
- 3 -
■
General Operation
▼
Never disassemble, modify or repair.
Doing so could result in electric shock, fire and injury. For repairs, call your sales agency.
Prohibited
▼
Do not attach this option to any inverter other than the VF- S15/AS3.
Doing so could result in electric shock or fire.
▼
When the inverter is energized, never detach the this option from the VF- S15/AS3.
Doing so could result in electric shock.
▼
Don't place or insert any kind of object into this product (electrical wire cuttings, rods,
wires).
Doing so could result in electric shock or fire.
▼
Do not allow water or any other fluid to come in contact with this product.
Doing so could result in electric shock or fire.
Mandatory
▼
Turn off the VF- S15/AS3 when installing and wiring this option.
▼
If the inverter begins to emit smoke or an unusual odor, or unusual sounds, immediately
turn power off.
If the equipment is continued in operation in such a state, the result m
local sales agency for repairs.
■
Transportation & installation
Prohibited
▼
Do not operate the inverter if it is damaged or any component is missing.
Doing so could result in electric shock or fire. Call your local sales agency for repairs.
▼
Do not place any inflammable substances near the VF- S15/AS3.
If an accident occurs in which flame is emitted, this could lead to fire.
▼
Do not install in any location where the inverter could come into contact with water or
other fluids.
Doing so could result in electric shock or fire.
▼
When installing this option, be careful not to touch the leads from parts on the reverse
side of its circuit board.
Doing so could result in injury.
▼
Operate under the environmental conditions prescribed in the instruction manual.
Operations under any other conditions may result in malfunction.
To Next Page
Loading...
Need help?
General
