5. INSTALLATION PROCEDURE
5.3 Loading the Receipt Roll
5-5
EO1-13021
5.3 Loading the Receipt Roll
When you use this printer for the first time or when the receipt paper has been used up, load a receipt
roll in the following procedures while the printer power is set to ON.
A thermal printer prints thermal receipt paper by applying heat to the paper to react with the chemicals
on the paper surface. A red line which appears on the reverse side of the receipt paper indicates that
the paper is almost used up.
WARNING!
The print
head
becomes
very hot
while
printing.
Never touch
the print
head to
avoid getting
burned.
Standard
operating
temperature
of printer is
5
o
C to 50
o
C.
Please do
not operate
out of range
for safe
operation
Hazardous
moving
cutter. Keep
fingers and
other body
parts away
Cutter Blades
Print Hea
To Next Page
Loading...
Need help?
General