Toshiba V Series - 4.1 Registering the DN311

50 model 3000 Ethernet Module / DS Connection Module Operation Manual
Chapter 4 Installation and Wiring
4
4.2.2 10BASE2 (EN731, EN741)
(1) Attach the T adaptor to the Ethernet connector (EN-A or EN-B). Turn the ring on the
T adaptor and check that the adapter is locked on the Ethernet connector of the EN7
module.
(2) After the 3D-2V cable or terminator to the T adaptor on the EN7 module. Turn the
BNC connector of the 3D-2V cable or terminator, and check that it is locked on the T
adaptor.
Figure 4-4 Mounting T Adaptor
Figure 4-5 Connecting 3D-2V Cable
EN7 module
Ethernet connector
T adaptor
Ring
3D-2V cable
T adaptor
EN7 module
(Ethernet connector)