6F8C0904 177
7.5 RAS Information Readout
7
Table 7-8 Event Trace Items
Event
code
Detail
information 1 (H)
Detail
information 2 (H)
Detail
information 3 (H)
Detail
information 4 (H)
Content
0001H ROM error (0160)
RAM error (0260)
DPRAM error
(0360)
Initialization error
0002H Program address Error code NMI (0000) Read port
contents
NMI occurrence
factor
TRAP (0001) None
Watchdog timer
check (0002)
Watchdog timer
flag
Watchdog timer
check (0003)
Watchdog timer
flag
0004H Power on (0001) Start type
Reset switch
(0002)
Software reset
(0003)
Request code Station status Write port contents
0005H Initialization
(0000)
Mode prior to
change
Mode after change Mode change
(Station status)
Control request
(0001)
Mode prior to
change
Mode after change
0007H Task ID Memory pool
number
Error code Instruction
storage buffer
allocation error
0008H Task ID Station status Transmission
disabled
0009H Receive response
code
Controller driver
reception/
response code
error
0100H CMD number
(0011)
Error code Station status Write port contents Controller/EN311
interface
completion error
CMD number
(0012)
UDP port (0001) UDP port number
Station status
(0002)
Station status
CMD number
(0013)
Mode prior to
change
Mode after change
Task start number Task completion
status
MAC setting flag IP setting flag
0200H Task ID Error code socket (0001) Message
transmission
completion error
bind (0002)
sendto (0003)
length (0004) Length
recvfrom (0005)
0300H Task ID Request code Error code Socket
transmission
completion error