EasyManua.ls Logo

Toshiba V Series - Page 239

Toshiba V Series
258 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6F8C0904 219
C
LAN controller
driver error
90H • Occurs if the setting of the local station IP address and port
number in the area reserved for transmission fails.
91H • Error in the TCP or UDP protocol (such as a transmission phase
error)
• The TCP socket was used to make the transmit request to the
socket (with the NOACK bit of the socket status is ON) due to
remote-station down.
92H • Occurs if the setting of the remote station IP address in the
remote station information area fails.
• Occurs if the remote station IP address network address differs
from the local station IP address network address.
Memory pool
allocation failure
A0H Occurs if the EN311 internal OS fails to allocate memory.
Port 2 task start
failure
A1H Occurs if computer link or PC link socket identifier acquisition fails.
Broadcast
specification error
A2H If the remote destination was specified to be broadcast in a remote
station verification request.
MAC address
specification error
B0H BCC error
B1H Occurs if an error occurs after address saving on a MAC setup
request.
Insufficient
resources error
C0H • Occurs if transmission is repeated to a non-existent remote sta-
tion with a cycle less than 100 ms.
• The UDP socket was used to make the transmit request when
the buffer in the EN311 became full without taking the receive
data over to the S3 side.
Error in the
receive request
from S3 (Number
of words)
C1H Occurs if the data size
specified by the user program
< the data size received by the
EN311
C2H Occurs if the size specified by the user program is out of range
(1 to 1000 words).
Transmission
buffer full
C3H Occurs if the remaining transmission buffer of the socket in which
the transmission request data is accumulated is smaller than the
data size of the transmission request for the TCP socket
transmission.
Remote station
window size is too
small
C4H Occurs if the window size of the remote station ACK is smaller than
the data size of the transmission request for the TCP socket
transmission.
Table C-2 Detailed Information
Error Code Description

Table of Contents

Other manuals for Toshiba V Series

Related product manuals