Toshiba Vm Series - TNB Module Parameter Configuration; Module Parameter Registration and IP Settings

Chapter 3 Setting
6F8C1637
26
Setting the module parameter.
Open the module parameter screen for the TNB previously registered, then
setting tab of [Parameter].
Figure 3-10 Module parameter registration screen
Register the IP address type, IP address, and subnet mask.
Note

Be careful so that the address does not overlap with other nodes.
Individual settings are as follows.
ꞏ IP address type: Select one type from V Standard 1, V Standard 2 or
any.
When V Standard 1:
IP address: 172.16.64.xx ("xx" indicates the value of the station address
setting switch.)
Subnet mask: 255.255.192.0