Chapter 3 Setting
6F8C1637
28
Option switch: For the option switches, refer to "3.5 Option
functions."
For scan cycle time of high, middle, low, Max length between nodes, and
Max repeater connections, set the same values for the entire system.
Download the registered information to the TNB.
To download, display the parameter information, and click [Download (D)].
To download for the tab of [Parameter] and [Talker block], click [Download
All(L)].
Figure 3-11 An example of module parameter registration
Restart it.
The downloaded information becomes effective at the next startup.
After the download is complete, restart it.