Tosot TUHD18ND3F1O User Manual

TOSOT DC INVERTER U-MATCH AIR
20
3.2 Operation View
3.2.1 Silk Screen of Buttons
Figure 2-3-3 Silk screen of buttons
3.3.2 Instruction to Function of Buttons
Table 2-3-2 Instruction to buttons of wired controller
No.
Description
Functions
1
Enter/Cancel
(1) Function selection and canceling;
(2) Press it for 5s to view the ambient temperature; press Mode button to
select viewing outdoor ambient temperature or indoor ambient
temperature.
2
▲
(1) Running temperature setting range of indoor unit: 16-30℃(61-86℉)
(2) Timer setting range: 0.5-24hr
(3) Setting of air function level
(4) Setting of energy-saving temperature
(5) Setting of cleaning class
▼
3
Fan
Setting of high/medium high/medium/medium low/low/auto fan speed.
4
Mode
Setting of auto/cooling/heating/fan/dry mode of indoor unit.
5
Function
Switch over among these functions of swing/air/sleep/health/
I-Demand/out/turbo/save/e-heater/X-fan/clean/quiet.
7
Timer
Timer setting.
8
On/Off
Turn on/off indoor unit.
4 Mode
and
2 ▲
Memory
function
Press Mode and ▲ buttons at the same time for 5s under off state of the unit
to enter/cancel memory function (If memory function is set, indoor unit will
resume original setting state after power failure and then power recovery. If
not, indoor unit is defaulted to be off after power recovery. Ex-factory setting of
memory function is on).

Tosot TUHD18ND3F1O Specifications

General

Brand	Tosot
Model	TUHD18ND3F1O
Category	Air Conditioner
Language	English