• To move the Total Flex™ L:
Move the machine by using the Carry Handle
General Maintenance
• The Total Flex™ L is for indoor use.
• Inspect the Total Flex™ L each time you
exercise and check for any loose parts
that may need to be tightened due to
wear and tear.
• If any of the Pulleys should squeak,
use a silicon-based lubricant to spray
onto the Pulley Shaft (see 1).
Note: Do not spray directly onto the
Pulley Wheel.
• If the Spring Pin becomes stiff and/or
the Seat becomes difficult to move up
or down, lubricate the Spring Pins
and/or inside of the support leg
channels with a silicon-based spray (see 2).
• Wipe away any excess lubrication.
I. Maintaining the Total Flex™ L
Warning: Exercise caution when lifting the machine
to avoid back injury.
1
2
17
To Next Page
Loading...