Totalcomp TWP Series - Animal Weighing; Peak Hold

TWP Weighing Indicator Service Manual
- 12 -
11. Animal Weighing
TWP can use for vibrate loads.
For this function, set to parameter P4 CHk to ModE 2
After select this function, display indicator ANIMAL will be shown.
 Bring the load on to the platform.
 When the load few seconds get stable, the reading will be locked for few
seconds and will be follow beep.
 It can add or remove loads also update the weighing locked values.
12. Peak Hold
TWP can operate peak hold function, maximum reading will be hold and will
update automatically when add goods.
For this function, select parameter P4 CHk to ModE 4
In the normal weighing mode press and key together to turn on
Peak hold operations, display will be indicate HOLD.
If want to turn off peak function, press and key together again