TWP Weighing Indicator Service Manual
Used to reset to Zero. In setting mode can use to confirm entry
Used to recording tare values and change the value from gross
value to net value. Insetting mode can use to increase the
value and scroll forward in menu.
When the scale has been tare and display is in gross or net
mode. When using the settings mode, can use to move active
digits right.
For print the results, to the PC or printer using the optional RS-
232 interface. It also adds the value to the accumulation
memory if the accumulation function is not automatic. When
using the settings mode, can use to move active digits left.
Switch to unit weight. In setting mode, escape back to menu/
weighing mode.
To Next Page
Loading...