tousek ST 63 - 1. General ST 63 Control Unit; Product Features Overview; Operating Modes Explained; Technical Data Specifications

- 4 - tousek / EN_ST-63_02 / 25. 03. 2020
1. General ST 63 control unit for folding and swing gates
Product features
• Suitable for folding/swing gates with the electromechanic
operators SWING X3 TPspeed and SWING X4 LHTP with
integrated speed sensor (1 leaf or 2 leaves operation possible).
• opening and closing delay for one leaf separately adjustable
• automatic closing time adjustable
• runtime for the both operators detected automatically
•
swing gate: separate adjustable soft stop time of both operators
folding gate: adjustable ramp time (no loss of fore even
with reduced speed)
• safety system ARS (autom. reversal system)
•
operating mode: impulse, automatic, dead man or emergency mode
• integrated evaluation of safety sensing edges
• self-monitoring of photocells
• self-diagnosis display
•
optional module: “electric lock /magnetic clamp” or “drop bolt”
• slots for optional modul and radio receiver
• easy programming via menu navigation
Function ST 63 control unit for folding and swing gates
The following operating modes can be selected:
• impulse: opening and closing via command given by an impulse button
• automatic: automatic closing if pause time is over
• deadman mode: The motor opens as long as the impulse button is pressed (hold)
• Emergency mode: deadman mode without safety devices (in case of malfunction)
1K
ST63 for 1 leaf,
in plastic housing 295 x 340 x 130mm
1 / 2
ST63 for 1 or 2 leaves,
in steel housing 600 x 380 x 210mm
Technical data
Folding/swing gate control unit ST63 Types
power supply 230V a.c., +/-10% 50Hz ST 63K 1-leaf Art.Nr. 12112240
motor output
(via FU-frequency converter)
1-leaf: 1 x 370W, 3 x 230Va.c.
2-leaves: 2 x 370W, 3 x 230Va.c.
housing
plastic
295 x 340 x 130mm
ashing light output 24Va.c., max. 5W
courtyard light output 230V a.c., max. 60W ohmic
frequency converter 1 (for 1 leaf)
E-Schlossausgang optional 12Vd.c. or 24V d.c. (via module) ST63 1-leaf Art.Nr 12112210
magnetic clamp output optional 24Vd.c. (via module)
housing
steel
600 x 380 x 210mm
power supply output 24Va.c.
photocell output 24Va.c.
frequency converter 1 (for 1 leaf)
ambient temperature -20°C to +70°C ST63 2-leaves Art.Nr. 12112220
protection class IP66
housing
steel
600 x 380 x 210mm
speed sensor
frequency converter 2 (for 2 leaves)
Additional modules
for the steel cabinet
optional dropbolt control unit (1- or 2-leaves)
• optionale traffic light control unit STA 11
other optional
components
pluggable radio receiver • Additional module for gate status evaluation, • E-lock/magnet module or drop bolt
module
To ensure a perfect operation an all-current-sensitive residual current circuit breaker
type B must be used!