Need help?Do you have a question about the tousek PULL T5 and is the answer not in the manual?
Highlights the main functional and design attributes of the PULL T5, T8, -T10 operators.
Presents key technical specifications including power, weight, speed, and protection class.
Presents a diagram of the control board and identifies its key components and connectors.
Specifies the function and connection points for all terminals on the control board.
Introduces the menu system for configuring the gate operator's functions and settings.
Explains how to use the buttons to navigate menus and adjust parameters.
Provides a hierarchical view of all available menu points and their organization.
Covers the general principles for connecting external devices and making adjustments.
Details the wiring and operational modes for impulse switches connected to the operator.
Explains the connections and functions for pedestrian entry and gate closing buttons.
Introduces photocells as safety devices and their connection methods.
Illustrates different wiring configurations for various photocell models.
Details how to configure safety sensing edges for obstacle detection during gate movement.
Explains the serial connection of safety sensing edges to the control board terminals.
Describes various functions and behaviors of the photocell during gate operation.
Highlights the main functional and design attributes of the PULL T5, T8, -T10 operators.
Presents key technical specifications including power, weight, speed, and protection class.
Presents a diagram of the control board and identifies its key components and connectors.
Specifies the function and connection points for all terminals on the control board.
Introduces the menu system for configuring the gate operator's functions and settings.
Explains how to use the buttons to navigate menus and adjust parameters.
Provides a hierarchical view of all available menu points and their organization.
Covers the general principles for connecting external devices and making adjustments.
Details the wiring and operational modes for impulse switches connected to the operator.
Explains the connections and functions for pedestrian entry and gate closing buttons.
Introduces photocells as safety devices and their connection methods.
Illustrates different wiring configurations for various photocell models.
Details how to configure safety sensing edges for obstacle detection during gate movement.
Explains the serial connection of safety sensing edges to the control board terminals.
Describes various functions and behaviors of the photocell during gate operation.
General| Motor Voltage | 24 V DC |
|---|---|
| Max. Gate Weight | 500 kg |
| Max. Gate Length | 5 m |
| Operating Temperature | -20°C to +55°C |
| Protection Class | IP54 |
| Power Supply | 230 V AC |
| Speed | 0.3 m/s |
To Next Page
