EasyManua.ls Logo

Toyopuc PC3 - Table of Contents

Default Icon
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Toyopuc PC3/PC2 Ethernet Driver
Table of Contents
Toyopuc PC3/PC2 Ethernet Driver
1
Table of Contents
2
Toyopuc PC3/PC2 Ethernet Driver
4
Overview
4
Setup
5
Channel Properties - General 6
Channel Properties - Ethernet Communications 7
Channel Properties - Write Optimizations 8
Channel Properties - Advanced 9
Device Properties - General 9
Device Properties - Scan Mode 11
Device Properties - Timing 12
Device Properties - Communications Parameters 13
Device Properties - Redundancy 13
Diagnostics Tags
14
Multi-Point Read Support
15
Data Type Description
19
Address Descriptions
20
PC2/PC2 Interchange Mode Address Descriptions
20
PC3 Address Descriptions
22
PC10G Address Descriptions
26
Error Descriptions
31
Address Validation
31
Missing address. 31
Device address <address> contains a syntax error. 31
Address <address> is out of range for the specified device or register 31
Data Type <type> is not valid for device address <address>. 32
Device address <address> is read only. 32
Array size is out of range for address <address>. 32
Array support is not available for the specified address: <address>. 32
Device Status Messages
33
Device <device name> is not responding. 33
Unable to write to <address> on device <device name>. 33
Device Error Codes
34
Error Response Data: Error Code Table 34
Appendix: Configuring Modules
36
www. kepware.com
2