Toyopuc PC3/PC2 Ethernet Driver
Device Status Messages
The following error/warning messages may be generated. Click on the link for a description of the message.
Device <device name> is not responding.
Unable to write to <address> on device <device name>.
Device <device name> is not responding.
Error Type:
Serious
Possible Cause:
1. The driver cannot create a socket connection between the device and the Host PC.
2. The response from the device took longer to receive than the amount of time specified in the
"Request Timeout" device setting.
3. The IP address for the device is incorrect.
4. The TCP/IP Port specified in device settings is incorrect.
Solution:
1. Verify that the Ethernet connections between the PC and the network are functional.
2. Increase the Request Timeout setting so that the entire response can be handled.
3. Verify that the Ethernet connections between the device and the network are functional.
4. Verify that the specified IP address matches the Device IP.
5. Verify that the specified TCP/IP Port matches the port used by the device.
Unable to write to <address> on device <device name>.
Error Type:
Serious
Possible Cause:
1. The driver cannot create a socket connection between the device and the Host PC.
2. The IP address for the device is incorrect.
3. The TCP/IP Port specified in device settings is incorrect.
Solution:
1. Verify that the Ethernet connections between the PC and the network are functional.
2. Verify that the Ethernet connections between the device and the network are functional.
3. Verify that the specified IP address matches the Device IP.
4. Verify that the specified TCP/IP Port matches the port used by the device.
www. kepware.com
33
To Next Page
Loading...