Toyota 1CD-FTV - Install Straight Pin; Install Stud Bolt

A87941
10 mm (0.394 in.)
22 mm
(0.866 in.)
6 mm (0.236 in.)
11 mm
(0.433 in.)
14 mm
(0.551 in.)
A
B
Rear Side: Exhaust Side:
C
B
A
C
6 mm (0.236 in.)
A87942
Rear Side: Lower Side:
A
27.5 mm
(1.083 in.)
A (M6) B (M6)
28 mm
(1.102
in.)
B
−ENGINE MECHANICAL CYLINDER BLOCK ASSY (1CD−FTV)(FromSeptember,
2003)
14−57
1CD−FTV ENGINE REPAIR MANUAL (RM1046E)
23. INSTALL STRAIGHT PIN
(a) Using a plastic−faced hammer, tap in new straight pins.
Standard protrusion:
13 mm (0.5118 in.) for straight pin A
4.0 mm (0.1575 in.) for straight pin B
5.0 mm (0.1968 in.) for straight pin C
24. INSTALL STUD BOLT
(a) Install the stud bolts as shown in the illustration.
Torque: 2.9 N×m (30 kgf×cm, 27 in.×lbf)
ProCarManuals.com