1308O−01
A86433
Turn
A86434
−INTAKE TURBOCHARGER SUB−ASSY (1CD−FTV)(From
September, 2003)
13−1
1CD−FTV ENGINE REPAIR MANUAL (RM1046E)
TURBOCHARGER SUB−ASSY (1CD−FTV)(From September,
2003)
INSPECTION
1. INSPECT TURBINE SHAFT
(a) Check the operation.
(1) Grasp the edge of the turbine shaft, then turn it.
Check that the turbine shaft turns smoothly.
If the turbine shaft does not turn or it turns with heavy drag, re-
place the turbocharger.
2. INSPECT ACTUATOR OPERATION
(a) Apply vacuum of 66 kPa (500 mmHg, 20 in.Hg), then raise
the actuator push rod.
(b) Lower the vacuum, then check the stroke when the vacu-
um is at the following values.
Standard stroke:
50 kPa (375 mmHg, 15 in.Hg): 0.2 mm (0.008 in.)
30 kPa (225 mmHg, 9 in.Hg): 5.0 mm (0.197 in.)
If the operation is not as specified, replace the turbocharger.
ProCarManuals.com
To Next Page
