Toyota 62-8FDU30 User Manual

8-158 8 TROUBLESHOOTING
Control type
Phenomenon on
vehicle
Malfunction area
and mode
Checking method Corrective action
Travel and load
handling control
For vehicles with
travel and load
handling control:
Speed limit applies
when loaded despite
being at a low lifting
height
▪ Lifting height
switch unit:
Disconnection
fault (Internal
damage, stuck)
ON/OFF check with
analyzer
Harness check or re-
place switch
▪ Display setting:
Maximum speed
limiter, speed
limiter setting
enabled
Check the setting
content of the max-
imum speed limiter,
check the setting
content of the speed
limit setting.
Change
▪ SAS/OPS con-
troller:
Controller defect
- Replace
For vehicles with
travel and load
handling control:
Speed limit applies
at all times regard-
less of lifting height
or load
▪ SAS/OPS con-
troller:
Controller defect
Check the setting
content of the max-
imum speed limiter,
check the setting
content of the speed
limit setting.
Change
▪ SAS/OPS con-
troller:
Controller defect
- Replace

Toyota 62-8FDU30 Specifications

General

Brand	Toyota
Model	62-8FDU30
Category	Forklifts
Language	English