7-70 7 DISPLAY
7.1.6.3.3 Menu Lock setting screen
▪ This function can limit the change of the vehicle setting by
the operator.
When menu lock setting is "YES”, the following items are
limited.
･Setting menu for operator is NOT displayed.
･Eco-mode is NOT changed.
▪ Menu lock indicator is displayed on the status screen when
menu lock setting is “YES”.
Switch (2): Selecting "Yes"
Switch (3): Selecting "No"
Switch (4): Returning to menu screen
Conditions to release Menu lock vary by optionset items, "MENULOCK SPEC". In factory setting, "MENU-
LOCK SPEC" is preset in "A" on US domestic models and CANADA SPEC [OPT] models, and is preset in
"B" on export models [OPT] (except for CANADA SPEC [OPT]) and E.E.C. spec [OPT].
MENULOCK SPEC : A
The lock release setting (“NO”) is effective till key-OFF. (It means set “YES” automatically when the key
switch is turned off.)
MENULOCK SPEC : B
The lock release setting (”NO”) is effective till setting "YES" with a setting screen again.
To Next Page
Loading...
Need help?
General
