7-124 7 DISPLAY
7.2.4.7 TUNING ATT1 LEVER "ATT1 PUSH/ATT1 PULL"
Sets tuning levels for the attachment (1) lever of mini lever and joy stick vehicles.
Operating Procedure
Step 1 Display the "TUNING MENU" screen.
Switch (1) Switch (2) Switch (4)Switch (3)
Step 2 Press switch (1) 3 times to check that "4. ATT1
LEVER" is selected, and press (enter) switch (4) to
display the "ATT1 PUSH" screen.
NOTICE:
â–ª You cannot move directly from level setting
screen of "ATT1 LEVER" to the screen of the
other items. Return to "TUNING MENU"
screen once, then move to level setting
screen of each item.
â–ª "ATT1 PUSH"
Attachment (1) lever push operation tuning screen
Switch (1): Switching selection to next item
Switch (2): Tuning level down
Switch (3): Tuning level up
Switch (4): Returning to "TUNING MENU" screen
â–ª "ATT1 PULL"
Attachment (1) lever pull operation tuning screen
Switch (1): Switching selection to next item
Switch (2): Tuning level down
Switch (3): Tuning level up
Switch (4): Returning to "TUNING MENU" screen
To Next Page
General
