Toyota 8FGU32 User Manual

2-35
DISASSEMBLY, INSPECTION AND REASSEMBLY
Disassembly and reassembly procedure
The reassembly procedure is the reverse of the disassembly procedure.
Procedure
I Item I Disassembly I Inspection / Reassembly
1 I Cylinder head assembly I see p.2-10 I t I t
2 1 Timing gear parts I see p.2-20 I t I t
3 1 Oil strainer I I I
4 1 Rear oil seal retainer with oil seal I I I
5 / Rear oil seal I I / [point 121
6 1 Measure the thrust clearance of the connecting rod. 1
7 1 Connecting rod cup with bearing I I [Point 21 1 [Point 111
10 1 Measure the thrust clearance of the crankshaft. / ( [point 51 1
8
9
13 1 oil regulator I I I
Piston with connecting rod
Piston disassembly
11
12
[Point 31
Crankshaft cap, bearing, thrust washer
Crankshaft
[Point 41
[Point 61
[Point 101
[Point 91
[Point 71
[Point 81
1DZ-II Repair
Section 1.2.2

Toyota 8FGU32 Specifications

General

Model	8FGU32
Tire Type	Pneumatic
Load Capacity	3200 kg
Fuel Type	Gasoline/LPG
Overall Width	1270 mm (50 in)
Travel Speed (Loaded/Unloaded)	11.8 mph
Lift Speed (Loaded/Unloaded)	0.48 / 0.52 m/s (94.5 / 102.4 fpm)