Toyota COASTER - Changing the Engine Switch Positions; Turning the Key from “ACC” to “LOCK”

151
4-2. Driving procedures
COASTER_GW-E
4
Driving
“LOCK”
The steering wheel is locked and
the key can be removed. (Vehicles
with an automatic transmission:
The key can be removed only
when the shift lever is in P.)
“ACC”
Some electrical components such
as the audio system can be used.
“ON”
All electrical components can be
used.
“G” (1HZ engine)
Glow plugs on and the engine is
preheated.
“START”
For starting the engine.
■ Turning the key from “ACC” to “LOCK”
Shift the shift lever to P (automatic transmission) or N (manual transmis-
sion). (P. 153, 158)
■ When the steering lock cannot be released
Changing the engine switch positions
1
2
3
4
5
1
Push in the key and turn it to the
“LOCK” position.
When starting the engine, the engine
switch may seem stuck in the “LOCK”
position. To free it, turn the key while turn-
ing the steering wheel slightly left and
right.
2
COASTER_OM_General_OM36742W