366
7-3. Do-it-yourself maintenance
COASTER_GW-E
Install a new light bulb.
Align the 3 tabs on the light bulb
with the mounting, and insert.
Install the light bulb retaining
spring.
Install the connector.
Install the rubber cover.
When installing the rubber
cover, align the tab on the rub-
ber cover with the cutout of the
mounting hole.
Ensure the rubber cover is
securely attached.
When installing the headlight unit, install by conducting from
to with the direction reversed.
8
9
10
11
12
3
1
COASTER_OM_General_OM36742W
To Next Page