234
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
1 Display the message inbox screen.
(P.233)
2 Select the desired message from the
list.
3 Check that the message is displayed.
RECEIVING A MESSAGE
When an e-mail/SMS/MMS is re-
ceived, the incoming message screen
pops up with sound and is ready to be
operated on the screen.
No. Function
Select to check the message.
Select to not open the message.
Select to call the message sender.
● Depending on the cellular phone used
for receiving messages, or its registra-
tion status with the system, some infor-
mation may not be displayed.
● The pop up screen is separately avail-
able for incoming e-mail and SMS/MMS
messages under the following condi-
tions:
E-mail:
• “Incoming E-mail Display” is set to “Full
Screen”. (P.248)
• “E-mail Notification Popup” is set to on.
(P.248)
SMS/MMS:
• “Incoming SMS/MMS Display” is set to
“Full Screen”. (P.248)
• “SMS/MMS Notification Popup” is set
to on. (P.248)
CHECKING MESSAGES
No. Function
*
Select “Mark Unread” or “Mark
Read” to mark mail unread or read
on the message inbox screen.
This function is available when “Up-
date Read Status on Phone” is set to
on. (P.248)
Select to reply the message.
(P.235)
Select to display the previous or
next message.
Select to have messages read out.
To cancel this function, select
“Stop”.
When “Automatic Message Read-
out” is set to on, messages will be
automatically read out. (P.248)
Select to make a call to the sender.
*: E-mail only
To Next Page
Loading...
Need help?
General
