VSS3 9
2.4. Arm without intrusion sensor
If you have to lock the car with somebody inside (passenger, children, dog, …), or if you want to
leave the window open, you must deactivate the intrusion sensor.
Activation steps Hazard light
indication
Alarm status
light (LED)
Buzzer
1 Lock the car by the
remote control.
Flashes once. ON for 30 sec. 1 beep sound if
buzzer enabled.
2 During the rst
30 sec., press the
lock button again
once.
Flashes once. ON for 30 sec. 1 beep sound if
buzzer enabled.
Summary:
press the remote
twice within 30 sec.
Note:
– The interior sensor is deactivated for 1 use only. Next time you arm, the interior sensor will be
activated again.
To Next Page
Loading...
