Toyota vss3 - Vehicle Security System PIN Code

6 VSS3
1. PIN code
If the alarm system has been installed in your vehicle, you did receive from the authorized retailer a
card (credit card size) with a PIN code (Personal Identication Number) consisting of 4 numbers.
The PIN code is used to deactivate the alarm system in case the remote control stops working. It
will also be used by your authorised dealer to change your system conguration.
 You should keep this card always with you. Do not leave it in your car.
If you have lost your PIN code, take contact with your authorized retailer.
To enter the PIN code
1 Press the button on the LED push button the number of times that corresponds to the rst
digit of the PIN Code, with a maximum 1.5 second delay between one press and the next.
If the LED is already on when the button is pressed, it will go out.
2 Wait for the LED to ash indicating that the next digit can be entered.
3 Repeat the process for all four digits.