12 VSS3
3. Features
As well as the alarm function, some extra features are available which can be activated/deactivated.
To activate or deactivate any of them, please contact your authorised retailer.
3.1. Door ajar warning
This option is enabled as default.
If any door or the boot is opened when the lock button is pressed, the buzzer will sound for
10 times. The buzzer will stop sounding when all doors are closed, or if the remote control unlock
button is pushed.
If the bonnet is opened when the lock button is pressed, the buzzer will sound 3 times with
3 beeps.
Note:
– The alarm system will arm, even if a door is open.
3.2. Alarm override
This function is used if the user loses the remote, or the remote battery is at.
To arm / disarm the system
1 Press the button on the LED push button the number of times that corresponds to the rst
digit of the PIN Code, with a maximum 1.5 second delay between one press and the next.
If the LED is already on when the button is pressed, it will go out.
2 Wait for the LED to ash indicating that the next digit can be entered.
3 Repeat the process for all four digits.
To Next Page
Loading...
