EasyManua.ls Logo

Toyota vss3 - Alarm System Troubleshooting

Toyota vss3
342 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VSS3 17
5. Troubleshooting guide
Problem Possible causes Possible solutions
System is beeping
10 beeps 1 door/boot or bonnet is open. Check that all doors are correctly
closed.
5 beeps at unlock Alarm went off while system was
armed.
Contact your authorised retailer to
nd the cause.
8 beeps Wire harness connection problem/
Siren failure.
Contact your authorised retailer to
nd the cause.
2 beeps Door was incorrectly closed during
last system arming.
False alarm
Intrusion sensors are broken,
detached, or incorrectly orientated.
Check and contact your authorized
retailer.
Passive arming ON. Read the passive arming chapter.
Deactivate passive arming (not
applicable for Belgium).
Opened window/sliding roof. Close all windows and sliding roof.
If you wish to keep any open,
deactivate the interior movement
sensors (see chapter 2.4.).
Hanging clothes/dangling
accessories.
Remove them.
People/animals inside. Deactivate the interior movement
sensors (see chapter 2.4.).
Defective door/bonnet/boot switch. Contact your authorized retailer.

Table of Contents

Other manuals for Toyota vss3

Related product manuals